Tu socio confiable para equipos globales de procesamiento de papel
Product Features
1. Inverted device
(1) The distance between the paper rolls is pulled apart by a three-stage belt differential, and the paper rolls are erected vertically through steps. They can be used vertically or horizontally;
2. Separate material handling and conveying equipment
(1) The separation device is driven by servo drive to complete the storage channel, which consists of 4 channels. The number of product columns can be adjusted on the touch screen;
(2) The sorting device will track the storage quantity of four channels and feed them one by one. When the number of product columns reaches the condition, it will automatically discharge and transport them to the next auxiliary device push head device.
3. Pull rod feeding device
(1) After passing through the sorting device, the paper roll enters the single and double layer stacking device, and is pushed into the single and double layer stacking device by the lever device.
4. Single and Double Layer Stacking Device
(1) After the paper roll enters, it automatically lifts and lowers the double-layer stack, and the function can be switched between single/double-layer through the screen selection.
5. Duck billed device
(1) The duckbill is an open bag, which can be stretched and retracted to open the bag.
6. Bag opening device
(1) After being sucked open by a negative pressure device and equipped with a bag rubbing function, the bag opening success rate is 100%
7. Bag storage device
(1) There are two bag storage platform brackets in total. One for use and one for backup;
(2) Equipped with photoelectric detection of bag inventory, the bag storage platform switching action is automatically completed by the cylinder;
(3) The front end of the bag storage platform has fixed brushes and blowing devices fixed on the rack, which can avoid the situation of pulling up two bags at once.
8. Sealing device
(1) Y Composed of upper and lower seals, left and right auxiliary pins, cutting blades, and tail sealing waste suction
9. Pushing device
(1) There are two push heads in total, and a separate servo driven pushing device is used to smoothly push the packaging into the packaging bag;
(2) The push head is equipped with a suction angle device
10. Electrical System
(1) Electrical equipment and its systems comply with the relevant provisions of GB/T5226.1-2002
(2) All motors are equipped with separate circuit breakers for protection
(3) The wiring specifications are neat and easy to maintain, and all wire numbers are complete, clear, and consistent with the provided drawing identification
(4) Simplified and user-friendly operation, with password protection for important parameters
11. Pneumatic system
(1) The configuration of the pneumatic system complies with national standards
(2) The air circuit layout is standardized, reliable, neat and beautiful
(3) The air inlet is equipped with an oil mist device and a pressure stabilizer, with an optimal working pressure of 0.6Mpa. The low-pressure equipment automatically alarms and shuts down
12. Protection System
(1) The protective device of the equipment is composed of sheet metal bent guardrails.
(2) The equipment is equipped with a startup alarm and a fault display system
(3) The equipment manual clearly specifies safety precautions, and warning signs are clearly affixed to hazardous devices and the mechanisms for power and air supply actions of the equipment
Emergency stop: Ensure that all moving mechanisms of the equipment are reliably stopped within 0.3 seconds
Product plan dimension diagram
Technical Specifications
design speed: | 30 packs per minute |
production speed: | 10-25 packs/min (depending on specifications) |
Powersupplyvoltage: | 0.6Mpa |
Motor power: | 12 Kw |
Host heating power: | 2.4Kw |
Total weight: | 2000KG |
Overall dimensions： | 1050 * 1770 * 1900 (length x width x height) |
Power type： | AC 380 V 50 Hz |
Finished product packaging size range
Standard machine: | Length180-700mm,width150-420mm, height 100-250mm |
Bag packaging method and schematic diagram
Roll paper packaging method (length * width * height ≤ 700 * 400 * 250mm):
1. Single layer double row vertical or horizontal 1 * 2 * 3=6/1 * 2 * 4=8/1 * 2 * 5=10/1 * 2 * 6=12;
2. Single layer three row vertical or horizontal 1 * 3 * 3=9/1 * 3 * 4=12/1 * 3 * 5=15/1 * 3 * 6=18;
3. Single layer four row vertical or horizontal 1 * 4 * 4=16/1 * 4 * 5=20/1 * 4 * 6=24;
4. Double layer double row vertical or horizontal 2 * 3 * 2=12/2 * 4 * 2=16/2 * 5 * 2=20/2 * 6 * 2=24;
5. Double layer three row vertical or horizontal 3 * 3 * 2=18/3 * 4 * 2=24/3 * 5 * 2=30/3 * 6 * 2=36;
6. Double layered four row vertical or horizontal 4 * 4 * 2=32/4 * 5 * 2=40/4 * 6 * 2=48;
Kitchen paper packaging method (length * width * height ≤ 700 * 400 * 250mm):
7. Single layer double row horizontal lying 1 * 1 * 2=2/1 * 2 * 2=4/1 * 2 * 3=6;
8. Double layer double row horizontal lying 2 * 1 * 2=4/2 * 2 * 2=8/2 * 3 * 2=12/2 * 4 * 2=16;
Partial transaction customers
Customer installation site pictures
FAQ
How to choose your own toilet paper processing equipment?
Recently, there are many friends who want to open a toilet paper processing factory at the end of the year, and some people ask me how to choose the toilet paper processing equipment that suits me, so Xiao Du is here today to explain in detail:
1, you need to be clear about your production needs: including how large scale of production you want, what kind of products to produce and quality requirements. Knowing this, you can determine the model and configuration of the required equipment.
Do toilet paper processing, how much profit a year?
Many novices have noticed that the toilet paper processing industry is a promising industry, but what they are most concerned about is, can we make profits from toilet paper processing? How much profit can we make in a year? Let me give you an estimate.
The profit of toilet paper processing plants depends on many factors, such as production efficiency, raw material costs, labor costs, market demand, etc. Generally speaking, the net profit of toilet paper processing plants is about 10%, that is, every ton of toilet paper sold can earn 10% of the profit.
Container loading image
Fully automatic single and double layer 4-row roll paper packaging machine
Share to:
Category:
TAG:tissue machine
Get A Quote
Note: Please leave your contact information and our professionals will contact you as soon as possible!
Related Products
2550 Full Wall Panel Toilet Paper Rewinder
2400 Full Wall Panel Toilet Paper Rewinder
Tissue paper storage rack machine
Fully automatic dual channel large rotary paper cutting machine